Pro-Tools Model 105 ELECTRIC OVER HYDRAULIC CONVERSION KIT

Pro-Tools Model 105 ELECTRIC OVER HYDRAULIC CONVERSION KIT

SKU: 105 SD/HD ELECTRIC/HYDRAULIC CONVERSION KIT

Regular price $1,999.95

This kit comes with everything you need to convert your manual 105 Standard or Heavy Duty Tube and Pipe Bender into an electric over hydraulic operation.  It installs in less than ten minutes. The Hydraulic Conversion Brackets extend the length of the swing arms to increase the torque output of the hydraulic cylinder while the spacers  maintain proper spacing, alignment, and rigidity of the swing arms and the brackets themselves. The 10-Ton Yoke provides a convenient mounting point for any of our 10-Ton Hydraulic Cylinders, where the 10-Ton Clevis mounts. Finally, the Hydraulic Pin secures the clevis to the hydraulic brackets. The mounting brackets and hardware are constructed of high-grade domestic steel and are engineered for multiple generations of use. It will withstand constant use of your bender in any setting.
The 14-1/8"? stroke, 10-ton hydraulic cylinder effortlessly powers our 105 Standard and Heavy Duty Tube and Pipe Benders. Even at full capacity of the benders, this cylinder, coupled our air/hydraulic pump, seamlessly bends any size tubing the 105 can handle. Aluminum bronze bearings reduce wear throughout the cylinder while a solid steel cylinder body ensures durability. The chrome-plated piston rod resists wear and corrosion while the rod wiper and urethane seal protects it from any contamination during cycles. Constructed with the maximum number of coils, the large springs speed piston return and increase spring life.
The SPX low-pressure, high-volume electric/hydraulic pump is roughly three time faster than any of our air/hydraulic units! Don't be fooled by cheaper pumps on the market; unlike most of its counterparts, this SPX pump is made in the USA and is completely serviceable, providing economical repair for a lifetime of use.  Its special high-torque motor with spline shaft puts out roughly 166 cubic inches per minute. Compare that to 10 cubic inches per minute of our air/hydraulic pumps! Bend one full stroke of the cylinder in nine seconds. Here's the best part: all of that power comes from a standard, 110V socket.
Designed for demanding applications, the Thermo-Plastic Safety Hydraulic Hose features a 4:1 safety factor. Constructed of polyurethane, its outside jacket provides maximum abrasion resistance. It exhibits low volumetric expansion under pressure to enhance overall system efficiency and a crimped-on rubber strain-relief improves life and durability. The quick-release coupling allows you to attach this hose to the pump in seconds. | Includes Hydraulic Cylinder; Electric/Hydraulic Pump; Hydraulic line, Hydraulic coupling; Hydraulic Conversion Hardware

***OVERSIZED, DOES NOT QUALIFY FOR FREE SHIPPING!***


We're wheelers too - we back every product with the TMR Customs quality guarantee. Our products are designed to be the ultimate in durability and withstand years of abuse. So go ahead and abuse them in the dirt and rocks - just as they were intended!

Designed, manufactured and tested by true off road enthusiasts!

You may also like